how to set up retropie on raspberry pi 2

#HOW TO SET UP RETROPIE ON RASPBERRY PI 2 ANDROID#
#HOW TO SET UP RETROPIE ON RASPBERRY PI 2 DOWNLOAD#
#HOW TO SET UP RETROPIE ON RASPBERRY PI 2 MAC#

On the RetroPie Desktop, press the Start button if you don't see a list of things you can do.That's why we needed it plugged in right away. When it's done you'll see the screen to set up your controller. The first boot might take a couple of minutes because it's setting a few things up. Don't worry, it automatically boots up to an easy graphical interface when it's done. While it's booting you see a bunch of text on a black screen and that's normal. Next, plug the HDMI cable in, then plug the power cord in. You can just grab the one from the computer you used to copy the OS and you're good to go. Any USB keyboard will work even a wireless one with a little dongle like this cool one from Logitech (opens in new tab). If you're using an Ethernet cable with your Pi you don't need a keyboard, but if you're going to use Wi-Fi you need one to enter your Wi-Fi password. When it's done, stick the SD card in the slot on your Raspberry Pi.

Don't interrupt it because it will tell you when it's finished.

Figure about three to five minutes for a typical PC. It's going to take a few minutes - the bigger the SD card the longer it takes.

Click the button that says Flash! and let it do its thing.

Pick your SD card with the middle button (if it's not showing the right one, click it to change things, then double-check it then triple check it).

Pick the RetroPie image you downloaded and press OK.

Open the Etcher program and click the first button that says Select Image.

Unzip the RetroPie image you downloaded and put it somewhere on your computer.

Write it down if you have to, because we'll need it here in a sec. If you tell Etcher to use the wrong drive, it can erase the stuff on your computer. Open the file explorer on your computer and triple check what drive the SD card you're going to flash is.

#HOW TO SET UP RETROPIE ON RASPBERRY PI 2 ANDROID#

Source: Android Central (Image credit: Source: Android Central) Plug your SD card into your computer and start flashing. Unless you already have a program you use to flash Raspberry Pi images, trust us.

#HOW TO SET UP RETROPIE ON RASPBERRY PI 2 MAC#

It's available for Windows, Mac or Linux and it's dead simple to use.

#HOW TO SET UP RETROPIE ON RASPBERRY PI 2 DOWNLOAD#

The best and easiest way is to download Etcher. You need to do this the right way so your Raspberry Pi can read it from the card and boot up. Now you need a program to flash RetroPie to the SD card. If you bought a different one, you'll find the version printed in white ink right on the top of the circuit board. If you bought the CanaKit, you have a Raspberry Pi 3 B+ so download the image for the 3. Make sure you pick the right file for your Raspberry Pi. On the Downloads page, you'll find a button to download RetroPie for the Raspberry Pi 0 or 1, and a download button for the Raspberry Pi 2 or 3. You don't need to be any sort of tech guru for this.įire up the computer and browse to the RetroPie website. You'll also need a computer running Windows, Mac OS, or Linux to flash the operating system to the card. You need two things from the Internet: the RetroPie operating system, and a utility to create a bootable file system on the SD card you'll be using. If you bought the CanaKit, you have a Raspberry Pi 3 B+. Source: RetroPie (Image credit: Source: RetroPie)

How to set up retropie on raspberry pi 2